Payment & Shipping Terms:
|Place Of Origin:||China Xiamen||Certificate:||CE And ISO|
|Bag Making:||Pre-made Bags||Packing Speed:||45 Bags/min|
Full servo high-end baby diaper adult diaper packing machine
|Packaging speed||Stable at 40bags/min,|
|Packaging method||Rolling film tape, making bags on line.|
|Packaging material||PE or complex film, single thickness was 50-100μm|
|Packaging dimension||L≤400mm ,W=200mm-400mm,H=90mm -200mm|
|Installation power||About 19KW|
|Power requirement||Three phase four wires system(A,B,C,PE),380V/50Hz|
|Air requirement||Input pressure: 0.6-0.8MPa, air consumption≦200LPM|
We have Great customized and design ability. Any required custom made machine can be
designed and manufactured for convenient operation and reasonable cost, making your
packaging system work smoothly.
1- We provide videos and instruction manual to show the process of installation.
2- We provide training for installation for free in our factory.
3- We can send technician to buyer's factory to install the machine and provide training service.
After Sales Service:
1- One year quality warranty and free lifetime technique support.
2- Free spare parts would be supplied if machine broken within warranty period.
3- After the warranty period, the spare parts for replacement are offered based on certain charge.
Changing the format by changing the size compnent,it only takes 20 minutes,it improved the production efficiency.
The full servo driving
By adapting Mitsubishi and Yaskawa motion controlling PLC and general linear servo driving system,it ensured a highly accurate package and stability.
Intelligent failure analysis
When the machine breaks and materail abnormal operation happens,it gave out relatively failure warning tips.
The front compression device Controlling by the separate servo.The pads that out from the host machine to do the first compression, to improve the stability of pads-transferring.
The full servo baby diaper packaging machine, the unit type is GM089NY.Adopting the method of slide-pushing and the row chain transfer combination.
Easy to change the size, and only need to change a small part of the parts and a simple adjustment parameters, within 45 minutes to complete the change.
Waste will be generated after seal cutting, and then through the suction pump to the waste containers.
The protective device is made of aluminum alloy bracket and a transparent organic glass plate, the thickness of the glass plate should be over 6mm.
Stacking smaller pile and more bag station to avoid the problems of glue bag, electrostatic
The bags-transferring device is driven by the separate servo, to ensure the accurate for transfer place.
The suction bag device driven by the high-pressure pump to produce the high pressure, to ensure the suction bag stable and reliable.
The Base with the tube that wall thickness is 6mm, braced frame with solid rectangular steel that thickness is 50mm, the main panel using steel plate that thickness is 15mm.
The equipment manual specified safety precautions, in the dangerous device, the equipment of power transmission and air movement mechanism are labeled with obvious warning signs.
All of the machine parts should do the surface treatment, and transmission parts made of the special steel and quenching and tempering treatment.
The electrical system device in accordance with the relevant provisions of GB/T5226.1-2002.
Electric control cabinet door adopts rotary open, the wiring is neat and easy to maintain, the electric control cabinet equipped with an axial flow fan cooling system.
The configuration of pneumatic system is in line with the national standards.
Chemical nickel-plating was performed on all parts of the surface, contact with the products stainless steel materials using SUS304, and harmless to human body.